Cleaning the Ergoselect BP Cuff

Here is a guide on how to clean the Ergoselect BP cuff as advised by the manufacturers:

Removing the Microphone

Pull the end of the cuff through the metal clasp and fold out the cuff.  

Pull on the short Velcro tab to open the microphone pocket and carefully remove the microphone.

Cleaning

Clean the cuff and tubing with a moist cloth. You can use a dishwashing liquid or mild soap water.

Clean the microphone with a cloth moistened with alcohol or mild soap water.

Allow the microphone to dry before reinserting it in it's pocket.

Disinfection

For disinfection, spray a disinfectant sparingly on the cuff, the tubing and the microphone.

After the exposure time indicated by the manufacturer, wipe all components dry.

Inserting the Microphone

Slip the microphone into the pocket, the metal side facing the arm.

Guide the microphone cable out of the pocket and to the right of the Velcro tab. Then close the tab. 

Fold the end of the cuff over and introduce it into the metal clasp.

Inspection and Functional Test

Visually inspect the cuff and tubing for damage. Worn, porous, or otherwise damaged cuffs and tubing must not be used.